Error
# |
|
Meaning
of the message |
600 |
|
An
operation is pending. |
601 |
|
The
port handle is invalid. |
602 |
|
The
port is already open. |
603 |
|
Caller's
buffer is too small. |
604 |
|
Wrong
information specified. |
605 |
|
Cannot
set port information |
606 |
|
The
port is not connected |
607 |
|
The
event is invalid. |
608 |
|
The
device does not exist. |
609 |
|
The
device type does not exist. |
610 |
|
The
buffer is invalid. |
611 |
|
The
route is not available. |
612 |
|
The
route is not allocated. |
613 |
|
Invalid
compression specified. |
614 |
|
Out
of buffers |
615 |
|
The
port was not found. |
616 |
|
An
asynchronous request is pending |
617 |
|
The
port or device is already disconnecting. |
618 |
|
The
port is not open. |
619 |
|
The
port is disconnected. |
620 |
|
There
are no endpoints. |
621 |
|
Cannot
open the phone book file. |
622 |
|
Cannot
load the phone book file. |
623 |
|
Cannot find the phone book entry. |
624 |
|
Cannot
write the phone book file. |
625 |
|
Invalid information found in the phone book. |
626 |
|
Cannot load a string. |
627 |
|
Cannot find key. |
628 |
|
The port was disconnected. |
629 |
|
The port was disconnected by the remote machine. |
630 |
|
The port was disconnected due to hardware failure. |
631 |
|
The port was disconnected by the user. |
632 |
|
The structure size is incorrect. |
633 |
|
The port is already in use or is not configured for Remote
Access dialout. |
634 |
|
Cannot register your computer on the remote network. |
635 |
|
Unknown error. |
636 |
|
The wrong device is attached to the port. |
637 |
|
The string could not be converted. |
638 |
|
The request has timed out. |
639 |
|
No asynchronous net available. |
640 |
|
A NetBIOS error has occurred. |
641 |
|
The server cannot allocate NetBIOS resources needed to support
the client. |
642 |
|
One of your NetBIOS names is already registered on the remote
network. |
643 |
|
A network adapter at the server failed. |
644 |
|
You will not receive network message popups. |
645 |
|
Internal authentication error. |
646 |
|
The account is not permitted to log on at this time of
day. |
647 |
|
The account is disabled. |
648 |
|
The password has expired. |
649 |
|
The account does not have Remote Access permission. |
650 |
|
The Remote Access server is not responding. |
651 |
|
Your modem (or other connecting device) has reported an
error. |
652 |
|
Unrecognized response from the device. |
653 |
|
A macro required by the device was not found in the device
.INF file section.
|
654 |
|
A command or response in the device .INF file section refers
to an undefined macro
|
655 |
|
The <message> macro was not found in the device .INF
file section. |
656 |
|
The <defaultoff> macro in the device .INF file section
contains an undefined macro |
657 |
|
The device .INF file could not be opened. |
658 |
|
The device name in the device .INF or media .INI file is
too long. |
659 |
|
The media .INI file refers to an unknown device name. |
660 |
|
The device .INF file contains no responses for the command. |
661 |
|
The device .INF file is missing a command. |
662 |
|
Attempted to set a macro not listed in device .INF file
section. |
663 |
|
The media .INI file refers to an unknown device type. |
664 |
|
Cannot allocate memory. |
665 |
|
The port is not configured for Remote Access. |
666 |
|
Your modem (or other connecting device) is not functioning. |
667 |
|
Cannot read the media .INI file. |
668 |
|
The connection dropped. |
669 |
|
The usage parameter in the media .INI file is invalid. |
670 |
|
Cannot read the section name from the media .INI file. |
671 |
|
Cannot read the device type from the media .INI file. |
672 |
|
Cannot read the device name from the media .INI file. |
673 |
|
Cannot read the usage from the media .INI file. |
674 |
|
Cannot read the maximum connection BPS rate from the media
.INI file. |
675 |
|
Cannot read the maximum carrier BPS rate from the media
.INI file. |
676 |
|
The line is busy. |
677 |
|
A person answered instead of a modem. |
678 |
|
There is no answer. |
679 |
|
Cannot detect carrier. |
680 |
|
There is no dial tone. |
681 |
|
General error reported by device. |
682 |
|
ERROR WRITING SECTIONNAME |
683 |
|
ERROR WRITING DEVICETYPE |
684 |
|
ERROR WRITING DEVICENAME |
685 |
|
ERROR WRITING MAXCONNECTBPS |
686 |
|
ERROR WRITING MAXCARRIERBPS |
687 |
|
ERROR WRITING USAGE |
688 |
|
ERROR WRITING DEFAULTOFF |
689 |
|
ERROR READING DEFAULTOFF |
690 |
|
ERROR EMPTY INI FILE |
691 |
|
Access denied because username and/or password is invalid
on the domain.
|
692 |
|
Hardware failure in port or attached device. |
693 |
|
ERROR NOT BINARY MACRO |
694 |
|
ERROR DCB NOT FOUND |
695 |
|
ERROR STATE MACHINES NOT STARTED |
696 |
|
ERROR STATE MACHINES ALREADY STARTED |
697 |
|
ERROR PARTIAL RESPONSE LOOPING |
698 |
|
A response keyname in the device .INF file is not in the
expected format. |
699 |
|
The device response caused buffer overflow. |
700 |
|
The expanded command in the device .INF file is too long. |
701 |
|
The device moved to a BPS rate not supported by the COM
driver. |
702 |
|
Device response received when none expected. |
703 |
|
ERROR INTERACTIVE MODE |
704 |
|
ERROR BAD CALLBACK NUMBER |
705 |
|
ERROR INVALID AUTH STATE |
706 |
|
ERROR WRITING INITBPS |
707 |
|
X.25 diagnostic indication. |
708 |
|
The account has expired. |
709 |
|
Error changing password on domain. |
710 |
|
Serial overrun errors were detected while communicating
with your modem. |
711 |
|
RasMan initialization failure. Check the event log. |
712 |
|
Biplex port is initializing. Wait a few seconds and redial. |
713 |
|
No active ISDN lines are available. |
714 |
|
Not enough ISDN channels are available to make the call. |
715 |
|
Too many errors occurred because of poor phone line quality. |
716 |
|
The Remote Access IP configuration is unusable. |
717 |
|
No IP addresses are available in the static pool of Remote
Access IP addresses. |
718 |
|
PPP timeout. |
719 |
|
PPP terminated by remote machine. |
720 |
|
No PPP control protocols configured. |
721 |
|
Remote PPP peer is not responding. |
722 |
|
The PPP packet is invalid. |
723 |
|
The phone number, including prefix and suffix, is too long. |
724 |
|
The IPX protocol cannot dial-out on the port because the
computer is an IPX router. |
725 |
|
The IPX protocol cannot dial-in on the port because the
IPX router is not installed.. |
726 |
|
The IPX protocol cannot be used for dial-out on more than
one port at a time. |
727 |
|
Cannot access TCPCFG.DLL. |
728 |
|
Cannot find an IP adapter bound to Remote Access. |
729 |
|
SLIP cannot be used unless the IP protocol is installed. |
730 |
|
Computer registration is not complete. |
731 |
|
The protocol is not configured. |
732 |
|
The PPP negotiation is not converging. |
733 |
|
The PPP control protocol for this network protocol is not
available on the server. |
734 |
|
The PPP link control protocol terminated.. |
735 |
|
The requested address was rejected by the server.. |
736 |
|
The remote computer terminated the control protocol. |
737 |
|
Loopback detected.. |
738 |
|
The server did not assign an address. |
739 |
|
The remote server cannot use the Windows NT encrypted password. |
740 |
|
The TAPI devices configured for Remote Access failed to
initialize or were not installed correctly. |
741 |
|
The local computer does not support encryption. |
742 |
|
The remote server does not support encryption. |
743 |
|
The remote server requires encryption. |
744 |
|
Cannot use the IPX net number assigned by the remote server.
Check the event log. |
752 |
|
A syntax error was encountered while processing a script.
|
RAS
error codes 